NOTE: Make sure to read through all the instructions ahead of starting this activity. To get the best results, it is important to work through each step quickly.

This fun activity can get messy! Make sure to place a protective sheet down on your workspace before starting.

STEP 1: Empty one Coloured Powder Mix into a large metal mixing bowl.

STEP 2: Shake one Liquid Mix very well, then empty into the mixing bowl. Blend thoroughly using a spatula or whisk.

STEP 3: Use the pipette to add 1mL of water to the mixing bowl. Mix thoroughly.

STEP 4: Empty one Clear Powder Mix into the mixing bowl and mix thoroughly.

STEP 5: Check that this has been mixed enough by squeezing a small amount of mixture in your hand, if the mixture holds its squeezed shape then it is ready to use.

STEP 6: Gently place mixture into the Bath Bomb Shape Mould. Gently compress down while placing the mix. Make sure that the mould is completely full and compressed.

STEP 7: Gently flip over onto some baking paper and lay the mould flat.

STEP 8: Gently tap the Bath Bomb Mould with the back of a spoon to help release the bath bomb from the mold.

STEP 9: Carefully place the bath bomb and baking paper onto a towel and allow to dry for 24 hours.

STEP 10: Enjoy your bath!

Allkinds Bath Bombs are formulated with a naturally derived wash off dispersant to assist in non-slipping & non-staining. However, Allkinds makes no guarantee that Bath Bombs will not stain surfaces and will not accept any liability for any damage caused. It is common for Bath Bomb colours to become part of the bathtub ring, but should clean off with your regular cleaning products or white vinegar. Please clean the bathtub after use.